S-1 Autostream Stainless Steel 3-blade Feathering Propellers

Features:  316L and 2507 Duplex stainless material for increased strength and durability, less prone to electrolysis when mounted on a stainless shaft.  Independent forward & reverse pitch adjustment screws, which enable a diver to change, pitch in the water without dismantling the unit.  Standard on all propellers are DuPont Delrin bearings.

A Five Year Warranty ** is also included

     

BLADE DIA.
SHAFT DIAMETERS AVAILABLE
PRICING
15"
1" thru 1-1/2"
 Prices available upon request
16"
1" thru 1-1/2"
  
17"
1" thru 1-1/2"
  
18"
1" thru 1-1/2"
  
19"
 1" thru 1-1/2"
  
                         20"
                 1" thru 1-1/2"
  
                         22"
                 1" thru 1-1/2"
  
Anode
Zinc Tail Cone
  

Parts Included: (1) spare anode, (1) spare set of “O” ring seals, (1) wrench for pitch adjustment screw locknut, (1) shaft nut, and boring & keying to any standard SAE 16:1 taper, ISO 10:1 taper, or British 12:1 tapers.  Custom boring & keying for “special shaft tapers” will require an additional $75.00 charge.        




S-2 Autostream Stainless Steel 3-blade Feathering Propellers

        For SaildriveUnits: suitable for either Yanmar or Volvo engines                                      (Please note: propeller includes shock-absorbing rubber insert)

 

Features:  316L and 2507 Duplex stainless material for increased strength and durability, less prone to electrolysis when mounted on stainless saildrives.  Independent forward & reverse pitch adjustment screws, which enable a diver to change, pitch in the water without dismantling the unit.  Standard on all propellers are DuPont Delrin bearings.A Five Year Warranty ** is also included
BLADE DIAMETER
SHAFT DIAMETERS AVAILABLE
PRICING
15"
N/A
 Prices available upon request
16"
N/A
  
17"
N/A
  
18"
N/A
  
19"
N/A
  
20"
                         N/A
 
22"
                         N/A
 
S-2 Anode
Zinc Tail Cone
  

Parts Included: (1) spare anode, (1) spare set of “O” ring seals, (1) wrench for pitch adjustment screw locknut, (1) shaft nut, and boring & keying to any standard SAE 16:1 taper, ISO 10:1 taper, or British 12:1 tapers.  Custom boring & keying for “special shaft tapers” will require an additional $75.00 charge.        
.

*Prices subject to currency exchange variation & Martec reserves the right to alter prices without notice.  AUTOSTREAM feathering propellers are distributed in the U.S.A. by MARTEC Eng. Corp. 

We can provide replacement parts & service during the 5-Year Warranty period offered by

Seahawk Pty. Ltd.**

Martec Eng.Corp. 2257 W. Gaylord St. Long Beach, CA  90813 USA Tel: (562) 435-4494

Fax: (562) 435-7846   Website:  www.martec-props.com /email address: Martec-props@att.net

 

 
Return to Home Page